Ring belt (belt loop) is a flat conveyor belt production is completed, because of the use of the environment or conditions, you must use the ring belt, we will flat conveyor belt for curing joint (also known as hot stick), make it into a circular conveyor belt (belt loop). The joints with a strong core body strength could reach 90% of tape, the tape was no significant joint surface defect, therefore, circular conveyor belt transport balance, the use of small elongation. Ring belt (conveyor belt loop) with a core with high-quality cotton or cotton mixed-dimensional canvas made of 2-8 layers usually canvas or nylon (or polyester canvas) as a strong layer. The company can produce according to customer needs proper length, width and thickness of the ordinary type, heat type (≤ 180 ℃), cold-type (not lower than -40 ℃), acid and alkali resistant type, heat type (not more than 200 ℃) and the circular conveyor belt.

Circular sidewall conveyor belt Refers to the production process has made no joint circular conveyor belt, its strong joints with a core body strength can reach 90% of tape, the tape was no significant joint surface defect, therefore, tape transport balance, the use of small elongation. Conveyor belts with circular ribs or the dimension of quality cotton canvas made of woven cotton, usually 2-6 layers or NN-200 nylon canvas (or polyester canvas) as a strong layer. • the length of the ring belt wall and limit deviation: Ring Tolerances mm belt length m Length is less than 15 ± 50 Length 15-20 ± 75 With a length longer than 20 ± 0.5% The company can produce according to customer needs proper length, width and thickness of the ordinary type, heat type (≤ 120oC), cold-type (not less than-40oC), acid type, high temperature type (not higher than 150oC) and Health annular belt