1, the kind of conveyor belt during transportation and storage, should be kept clean to avoid sunlight value, snow or rain leaching leaching, prevent with acid, alkali, oil, organic substances such as soluble agent contact, and distance from the heating device one meter away.
　　2, storage warehouse temperature should be kept between - 18 ℃ to 40 ℃, relative humidity should be kept between 50-80% RH.
　　3, during storage, the product must be placed in rolls, not fold, during the placement should be flipping a quarterly.
　　4, different types, specifications, layer number of conveyor belt should not be connect together to use, its connection with glue joint is best.
　　5, the layer number of conveyor belt type, structure, specification, should according to the conditions of use reasonable choice.
　　6, the conveyor belt running speed should not be commonly big with 2.5 m/s, large blocks, abrasion resistant material and using a fixed plough type discharging device should be adopted as far as possible low speed.
　　7, cloth layer of conveyor belt conveyor drive roller diameter and closed the first roller and redirection roller, told and requirement for roller groove Angle should be prescribed according to the design of the conveyor, reasonable selection.
　　8, the feeding direction should be along the belt running direction, in order to reduce the material impact to tape down chute, should be adopted to reduce material falling distance; Tape material period should be shortened and the buffer roller, roller spacing to prevent leakage material, with lateral soft moderate keep-off plate, should be adopted to avoid the keep-off p plate, scraping the broken belt of the belt surface.
　　9, conveyor belt, in use should pay attention to the following:
　　(1) avoid rollers is covered by the material, causing rotation is ineffective, prevent leakage the material card between the roller and the tape, pay attention to the lubrication activities section, but not greasy dirt conveyor belt;
　　(2) avoid loading starts;
　　(3) the belt running deviation, should take timely measures to correct;
　　(4) found that tape local operation should be repaired in a timely manner, so as not to expand;
　　(5) avoid tape rack, pillar or block material block, prevent the touch broken rip